0.5.1 (23 Jun 2008)
- [kernel] linux-image-2.6.23-486-voyage_5.0-2
	- [general] enable math emulation
	- [netdev] enable gigabit dl2k, e1000e, ns83820 drivers
	- [framebuffer] enable lxfb for geodelx framebuffer support
	- [snd] enable snd_usb_audio
- [voyage-utils] 
	- enables heartbeat and ide LED drivers for ALIX and WRAP profiles.
	- new 4801 profile options
- [general] add security.debian.org to /etc/apt/sources.list

0.5.0 (29 Feb 2008)
- [kernel] linux-image-2.6.23-486-voyage_5.0-1
	- [general] Debian kernel source 2.6.23-2
	- [general] enable HPET and dynamic ticks
	- [geode] backport new mfgpt codes from 2.6.24
	- [net] built-in KLIPS for openswan
	- [netfilter] enable ipv6 netfilter
	- [scsi] add 3w_9xxx and aac_raid driver
	- [ata] add basic support for sata and pata drivers 
	- [wireless] add bcm43xx driver
	- [pcmcia] add basic support for PCMCIA usb network driver
	- [v4l] enable video capture, usb support and radio adaptor 
	- [fs] build-in unionfs
	- [misc] enable LED drivers
- [wireless]
	- madwifi driver update to 0.9.4rc2
- [general]
	- no. of fixes and enhancements in voyage.update [William Brack and Mike O'Connor]

0.4.1 (23 Jul 2007)
- [kernel] linux-image-2.6.20-486-voyage_4.0-2
	- [general] ubuntu kernel source 2.6.20-16.29 (Linux 2.6.20.10)
	- [ide] enable CS5535 chipset support
	- [netsched] add esfq queueing
	- [char] increase max. number of 8250 serial port to 20
	- [char] add AMD CS5535 UART2 as a serial port	
	- [char] add AMD Geode multi-purpose timers
	- [char] add real time clock support
	- [watchdog] add geodewdt for Geode GX/LX watchdog support
	- [hwmon] add k8temp and w83781d
	- [usb] add UDC/UOC support for Geode CS5536 companion chip
	- [snd] enable Advanced Linux Sound Architecture
	- [snd] ATI IXP, ALI and VIA AC97 controllers
	- [snd] CS5535 audio, SB Audigy, Creative Ensoniq/Emu10k1, Intel HD
- [wireless]
	- madwifi driver update to 0.9.3-3 with security fix
	- wireless-tools upgrade to 29pre22.
- [general]
	- add ALIX and 5501 profile in voyage.update and PXE boot menu
	- add build date in /etc/motd
	- move /etc/network/run to /rw
	
0.4.0 (23 Jun 2007)
- new x.y.z versioning scheme
- linux-image-2.6.20-486-voyage_4.0-1
	- [general] ubuntu kernel source 2.6.20-16.28 (Linux 2.6.20.10)
	- [iosched] set CFQ as default IO scheduler
	- [bus] add PCI Express and NatSemi SCx200 HR Timer support
	- [netfilter] add userland conntrack support
	- [netsched] add red and tbf queueing
	- [blkdev] add CS5535 support
	- [netdev] add forcedeth and VIA Rhine NAPI support
	- [wireless] remove ieee80211_softmac stack and ipw3945, add iwlwifi driver 
	- [wireless] add devicescape wireless stack - bcm43xx now uses dscape stack
	- [watchdog] add sc1200wdt, w83627hf_wdt, w83697hf_wdt and w83977f_wdt
	- [i2c] add CS5535 gpio support and remove incompatible i2c_nscacb
	- [usb] add Garmin USB serial support for GPS devices and QuickCam support
	- [cypto] add Geode LX AES support
- update madwifi-tools and madwifi modules (0.9.3)
- remove devices from /dev as udev taking care of it
- remove udev net-generator rules and script
- fix PXE boot with console screen 
- Live CD now shows splash logo at boot screen

0.3.1 (14 Apr 2007)
- sync with Debian 4.0 etch release
	
0.3 (16 Mar 2007)
- update madwifi-tools and madwifi modules (0.9.2_svnr2156)
- installation script update
- remove /etc/network/options, replaced with /etc/sysctl.conf
- Live CD: enable boot prompt and support auto-install
- trafmon script and bash_completion (by Solomon Asare)

0.3pre3 (28 Jan 2007)
- kernel-image-2.6.17-486-voyage_3.0-3
	- [general ] ubuntu kernel source 2.6.17.1-10.34 (Linux 2.6.17.14)
	- [scsi] Fusion MPT device
	- [netdev] gigabit ethernet: e1000, tg3, r8169
	- [fs] squashfs is now in kernel module
	- [fs] nfsd kernel module
- madwifi modules (0.9.2_svnr1842)
- add iperf, iptraf, netcat, sqlite3 & tcpdump 
- remove modutils

0.3pre2 (05 Dec 2006)
- kernel-image-2.6.17-486-voyage_3.0-2
	- removal of kernel drivers to minimize disk space
	- enable CAPI and mISDN driver
	- enable regparm
- madwifi modules (0.9.2_svnr1809)
- fix on ed/nano not removed cleanly
- update on voyage.update

0.3pre1 (17 Nov 2006)
- based on Debian 4.0 (etch) 
- kernel-image-2.6.17-486-voyage_3.0-1
	- [general] Ubuntu linux source 2.6.17-10.33
	- [general] kernel ticks count at 1000HZ 
	- [general] ACPI support
	- [netfilter] enable all netfilter xt_target
	- [netfilter] layer7, ipp2p, time netfilter support
	- [netfilter] NET_SCH_ESFQ, IFB and IMQ
	- [wireless] ieee80211_softmac and devicescape 802.11 wireless stack
	- [wireless] adm8211, bcm43xx, zd1211, acx, prism54_softmac, rtl818x, rtl8187
	- [wireless] ipw3945, rt2400, rt2500, rt61, rt73
	- [netdev] NE2000 ISA support
	- [netdev] pcnet PCMCIA support
	- [netdev] ISDN support
	- [fs] squashfs, unionfs and nfs v4	
- madwifi modules (0.9.2_svnr1784)
- booted with initrd and grub 
- newly written installation/updating scripts (by William M. Brack)
- voyage.update now in ./usr/local/sbin

0.2 (5 Apr 2006)
- kernel-image-2.6.15-486-voyage_2.0-10
	- Debian linux source 2.6.15-8
	- enable syn cookies
	- add hostap-EAPOL-fix.patch
- updated hostapd and wpasupplicant to 0.5.2
- madwifi-ng modules (r1491)
- add parprouted and bzip2
- voyage-util to sync /var/run in shutdown
- add voyage-configure.sh, format-cf.sh to /usr/local/sbin
- add voyage.conf to /etc
- add voyage login banner
- increase /rw tmpfs to 8M

0.2pre4 (26 Feb 2006)
- kernel-image-2.6.15-486-voyage_2.0-9
	- Debian linux source 2.6.15-7
	- PXE booting with CRAMFS (CONFIG_BLK_DEV_RAM, CONFIG_BLK_DEV_INITRD and CONFIG_CRAMFS)
	- i2c-nscacb support for Routerboard 
	- prism54 WDS support 
- add more samples in /etc/network/interfaces
- add bcm43xx firmware in /usr/lib/hotplug/firmware
- add new util, mount-proc.sh in /usr/local/sbin
- improved remove.docs
- add "options ath_pci autocreate=none" in /etc/modprobe.d/madwifi
- remove SystemV timezones
- madwifi-ng modules (r1453)
- add traceroute

0.2pre3 (05 Feb 2006)
- kernel-image-2.6.15-486-voyage_2.0-8
	- usbserial_maxsize.patch (usb high speed serial patch)
	- cdc-acm_2.6.14.c.patch (cdc_acm high speed patch)
	- NFS v3 client, rootfs & IP PNP (to support pxeboot in future)
	- remove madwifi driver in kernel source (now madwifi available in separate modules)
	- DOS/FAT/NT file systems 
	- SCSI disk storage (sd) and generic storage (sg) support 
	- NLS support for code page 437 and ISO-8859-1
	- loop and cloop 
- madwifi-ng modules (r1408) as default.
- root password now defaults to "voyage"
- DHCP enabled for dnsmasq 
- add less package
- wireless-tools 27+28pre13 
- customization scripts (in /usr/share/voyage-custom)

0.2pre2 (06 Jan 2006)
- kernel-image-2.6.15-486-voyage_2.0-7 
    - ipv6 basic support
	- video for linux
	- usb serial
	- lm77 fix for negative temperature (by Michael Renzmann)
	- scx200_acb probe delay fix (only 2.6.12, 2.6.14 and 2.6.15, by Ben Gardner)
	- madwifi-old CVS 20051224 
- add scx200_acb and lm77 to /etc/modules if for WRAP option in voyage.update
- regenerate ssh host keys for first time installation

0.2pre1 (21 July 2005)
- New 0.2 development
- kernel-image-2.6.8-486-voyage_2.0-2
    - Support module unload ( requested by Matthias Lemke )
    - sc520_wdt ported from 2.6.12 ( suggested by Pablo Osuna )
    - madwifi_20050712 MAIN branch (merged from BSD branch supported for 
adhoc mode)
    - hostap 0.3.9 driver
    - USB support
    - Bluetooth support
    - Remove ipw2100 module, which is available in separate kernel 
module package
- change apt repository to http://www.voyage.hk/dists/0.2
- use madwifi-tools instead of madwifi
- remove posix and right in /usr/share/zoneinfo (less 2MB in distro)
- change fstab to mount / as read-write 
- use /etc/init.d/voyage-util script (by Yiorgos Adamopoulos)
	- set root password in first run 
	- call /etc/init.d/rmnologin 
	- remount / read-only
- voyage.update
	- new WRAP option (detach from 4501/4801 option)
	- remove setting passwd
	- use reboot=bios (in lilo.conf) for WRAP

===========================================================================
0.1sarge (7 July 2005)
- special release for based on Debian Sarge (r3.1)

0.1 (14 Feb 2005)
- add ebtables and ifenslave
- update kernel image revision to 1.4 : kernel-image-2.6.8-486-voyage_1.4_i386.deb
	- enables i2c, lm77 sensors and other hardware sensors.
	
0.1pre5 (1 Feb 2005)
- fix high cpu consumption in nocatsplash 
- new Debian kernel source 2.6.8-13
	- update kernel image revision to 1.3 : kernel-image-2.6.8-486-voyage_1.3_i386.deb
	- add bonding, dm-mod and dm-crypt modules
	- add necessary modules required by OpenSWAN/FreeSWAN
	- fix kernel reboot for WRAP board

0.1pre4 (17 Jan 2005)
- nocatsplash 0.92
- fixed syslogd not logging 
- nat.sh: integrate with nocat

0.1pre3 (13 Jan 2005)
- new upstream Debian kernel source 2.6.8-12, with new driver patches
	- update kernel image revision to 1.2 : kernel-image-2.6.8-486-voyage_1.2_i386.deb 
	- hostap-driver 0.2.6 (update)
	- madwifi-cvs 20050109 (update)
	- rt2400 driver 1.2.1 (new)
	- ipw2100 driver 1.0.2 (new)
	- wd1100 driver (new, ported to 2.6 kernel) 
- change sarge.install to voyage.dpkg-l
- change sarge.dpkg.list to voyage.dpkg.list
- change sarge.depend.list to voyage.depend.list
- add watchdog package

0.1pre2 (6 Jan 2005)
- fix madwifi driver not loading 
- support for various config from installation script
- add lilo.conf to /etc/

0.1pre1 (2 Jan 2005)
- first preview release
- based on Debian Sarge r3.1
- 2.6.8.1 kernel
- prism54, hostap and madwifi drivers
- hostapd, wpa_supplicant from sarge
